New high quality German Heer (Army) helmet decals that are the proper size and colors with exact design replication. These come in pairs with Service and National Colors decals.
How to apply decals to your helmet.
There are
several methods and techniques to do this. This is only a suggestion for
our customers, we take no responsibility if you destroy your decals in the
process!
We
recommend using a decal setting solution when placing decals on a Helmet.
These are available in any hobby shop.
1) Cut out
you decals as close to the decal as possible.
2) Wet
down the area on the helmet you plan to put the decal on with decal
setting solution or water.
Soak the decals in water till the decal can easily slide off.
3)
Carefully slide the decals off the paper and onto the helmet, being careful not
to rip them.
4)
Position properly, centered under the air vent and brush lightly with
decal setting solution, allow to dry and put on as many coats of decal setting
solution as it takes to get it to set on to the surface of the helmet.
After the first round dries, I examine the decal and get a very sharp
needle and poke any air bubbles. Then apply the next drop of solution directly
to the tiny holes you just made. This will soak in and help draw the decal down
into those areas.
5) Once
the decal is positioned and dry, then apply as many coats of solution until the
decal has conformed to the surface of the helmet and all the air bubbles are
gone.
6) After
the decal is dry and in place, you can spray with a Dull-Coat, for a painted on
look.
wehrmacht decal 
Good detail. 
